大满贯老品牌

 
在校生 教职工 考生及访客 校友 EN
师资队伍
首页-师资队伍-博后队伍
博士后人员信息
博士后人员

仝大明

 

毕业于上海交通大学,主要研究方向包括热处理过程的数值模拟,热处理变形和残余应力研究,感应淬火工艺设计与开发。致力于热处理智能化方面的研究工作,曾参与了核电转子、大型锻件、曲轴、齿轮等多种零件的制造工艺研发。参与开发了国内第一款热处理数值模拟软件Thermal Prophet,大幅提高了热处理成功率,显著降低了研发成本。 

电话:021-34203743
邮箱:284980734@qq.com

合作导师:顾剑锋


杨继兰

 

从事专业:先进高强度钢

学习与工作简历:
2017年11月---至今,上海交通大学大满贯老品牌 博士后
2012年9月---2017年9月,上海交通大学大满贯老品牌  博士

研究方向一:先进高强度钢的设计及表征
研究方向二:电化学腐蚀行为及表征

电话:15221098997
E-mail:yanglan1021@163.com

合作导师:顾剑锋


Ashfaq Ahmad

Post Doctor

 

Research Interests; Physics; magnetic materials, catalysts, Nanotechnology, nanoparticles, Magnetic hyperthermia, MRI

Education:

PhD Physics, Kyungpook National University, South Korea, 2018
M.S Physics, COMSATS University, Islamabad, Pakistan, 2012

I am currently working as postdoc fellow in the Department of materials science and engineering at SJTU in Prof Fang Song Laboratory. Prior to this, I was working as an Assistant professor at Women University Swabi, Pakistan. My research interests include dimensionally controlled synthesis of nanomaterials (magnetic nanoparticles, electrocatalysts)  for bio-medical and electrocatalytic applications.

Phone: 13061793540
Email: Ashfaq@sjtu.edu.cn

Supervisor: Fang Song/宋钫


Atta ur Rahman

 

Dr. Atta ur Rahman holds Ph.D. degree in nano-materials from Department of Metallurgy and Material Engineering PIEAS Islamabad in 2014. His doctoral research focused on the structural, magnetic and electron transport Properties exhibited by the nano sized Inverse spinel ferrite. In 2014-15 he joined department of Physics AWK University Mardan (PAK) as Assistant Professor. He has also served as adjunct faculty member in University Lahore Pakistan.
He completed joined his first postdoctoral from SEIEE, SJTU IN Sept 2018. Currently he is working as postdoc fellow in SMSE under the supervision of Prof: Dr. Tongxiang Fan. His research project is related to the Designing, Simulation and Fabrication of Meta-materials for smart thermal control.

Phone:18202110732
Email:attaur@sjtu.edu.cn

Supervisor:Tongxiang Fan/ 范同祥


Behzad Sadeghi

 

Dr. Behzad Sadeghi has been with the Materials Science and Engineering as postdoctoral researcher in SJTU since 2018. He received a PhD. degree from Isfahan University of Technology in Iran, and a M.Sc. degree from the Tarbiat Modares University in Iran.
His research interests are primary in the field of microstructure-property relationships in advanced engineering materials especially aluminum matrix composites. Areas of research include advanced materials, aluminum alloys, advanced metal-matrix composites, High entropy alloys.

I have rich experience of Flake powder metallurgy technique, Severe plastic deformation techniques such as ECAP, HPT, etc, Fast assistant sintering such as Spark Plasma Sintering (SPS), Hot extrusion, Hot/Cold rolling process, Solid state joining such as Friction stir welding (FSW), making surface nanocomposites through Friction stir processing (FSP) and also producing high entropy alloys by PM.
During my Ph.D. period, I worked on the fabrication of bimodal reinforced Al-based composites produced via SPS. The joining of the fabricated nanocomposites was carried out using friction stir welding. Right now, I am working on the bulk CNT-Al composites fabricated by flake powder metallurgy via micro/macro rolling as a smart and practical route.
He has published over thirty peer-reviewed papers, with recent publications in the area of hot rolling of CNT/Al nanocomposites produced by SPS. Dr. Sadeghi has also been involved with the international material science community, serving as reviewer of journal papers. Besides, he has published two chapter related to SPS and the composite fabricated by it.

Phone:13917041452
Email:b.sadeghi2020@gmail.com

Supervisor:Zhiqiang Li/ 李志强


Farhad Saba

 

Postdoc Researcher, State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China

Dr. Farhad Saba received his Ph.D. in Materials science and engineering from Ferdowsi University of Mashhad (FUM) in 2017. Furthermore, he received B.S. degree in Materials Science and engineering from FUM in 2009 and also received his M.S. degree in the same field from University of Tehran in 2013. During Ph.D., he joined Southeast University (Nanjing, China) and worked for 6 months as a short research visitor in 2015. His PhD thesis focused on ‘’pulsed current ?eld assisted surface modi?cation of carbon nanotubes with nanocrystalline titanium carbide and using them as reinforcing agents in Al matrix composites’’. He has published around 20 articles in high-level/high-impact journals including CARBON, CERAMICS INTERNATIONAL, COMPOSITES PART A, RSC ADVANCES and so on. His research interest lies in the functionalization of nanostructured materials, specifically carbon nanotubes, and their application as reinforcements in metal matrix composites (MMCs). He currently works as a Postdoctoral researcher in State Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University, Shanghai, China.

Tel: 86-13061620271 
Email:Farhaad.saba@gmail.com farhad.saba@sjtu.edu.cnWebsite:https://www.researchgate.net/profile/Farhad_Saba3https://scholar.google.com/citations?user=chygiKUAAAAJ&hl=en

Supervisor:Zhiqiang Li/李志强


Hafeez Ur Rehman

 

Hafeez Ur Rehman (Ph.D.) belongs to the Islamic Republic of Pakistan. Currently, he is working in the SMSE as a Post-doctoral Research since 01-2019. Before joining SMSE, Dr. Rehman worked under the supervision of Professor Hezhou Liu as a Ph.D. researcher. He was amongst the excellent international students of SMSE, and SJTU during the session 2017-18. He published his scientific work in leading scientific journals of Advanced Functional Materials and Materials & Design, etc. Dr. Rehman is currently working on hydrogel/helical bundle composites with the abilities of self-healing and high-speed actuation at high loading. He has a passion for learning about polymer materials and their applications. Therefore, he often participates in knowledge-based activities.


Phone:18217251067
Email:hafeez.icp@gmail.com

Supervisor:Hezhou Liu/刘河洲


Imran Zada

 

Postdoctoral researcher, received Ph.D from Shanghai Jiao tong university, school of materials science and engineering in 2018. Mainly engaged in the fabrication of bio-inspired antireflective structure materials and Photothermal conversion materials for high efficiency solar vapor generation. Have published 16 SCI papers as the first and coauthor. Due to the innovativeness and novelty of his research work, more than 20 professional international scientific technology media, including Science Daily, MRS Bulletin, Phys. Org, Eurekalert, Optics & Photonics, etc. have reported, reproduced and evaluated his research papers. Due to his excellent research work during PhD, he has been awarded with “Excellent international student award (First prize) for the year 2016-2017 (SMSE@SJTU), first prize International Student award for the year 2017 and outstanding graduate of the year 2018 by shanghai jiao tong university. Currently, he has been selected for the project “Postdoctoral International Exchange Program” for the year 2018-2020 and participated in three more projects as a key member.


Tel: +86-18201852991
Email: imranzada99@gmail.com

Supervisor:Di Zhang/张荻
Platform: Institute of Composite Materials


Sravan Baddi

 

Dr. Sravan Baddi, did his research work at Council of Scientific & Industrial Research- Indian Institute of Chemical Technology (CSIR-IICT) and received his Doctoral Degree from Osmania University (INDIA) in 2018. From June 2019 onwards he started working as a Post-Doctoral fellow with Prof. Chuan Liang Feng in the School of Material Sciences and Technology, Shanghai Jiao Tong University (SJTU). His research mainly focuses on design and synthesis of novel multi-functional chiral supramolecular and polymeric hydrogels for biomedical, tissue engineering, and pharmaceutical application.


Phone:13004313657
Email: sravan.baddi@gmail.com

Supervisor: Chuanliang Feng/ 冯传良


Tahir Muhmood

 

Dr. Tahir Muhmood, currently working as “Professional Postdoc Researcher/Research Assistant” at “State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering (SMSE) "Shanghai JiaoTong University" (金属基复合材料国家重点实验室,上海交通大学) Shanghai, P.R.China. He obtained his Doctor degree in “Chemical Engineering & Technology” from "Nanjing University of Science & Technology, Nanjing. He got “Best Researcher of the Year Award” and “Distinguished Researcher of BS” during his stay in GC University Lahore. He published more than 22 SCI/JCR Q1/Q2-ranked articles Included JCR/SCI 1st-Top ranked category journals (Top期刊). One of his articles got the “VIP” (Very Important Paper) title from WILEY‐VCH Verlag GmbH & Co.KGaA, Weinheim, for publishing the innovative research. He wins six times the “International Students Papers Publication Awards” and also win the very exclusive and innovative award “Elite-Scholarship (年度中国政府优秀来华留学生奖学金)”. Also win the “Most Valuable Student Award (MVS-Award)” and “Academic Success Award of the Year” from, Nanjing University of Science & Technology, Nanjing P.R.China.


Phone: 18621864002
Email: muhmoodtahir@yahoo.com

Supervisor: Xiaobin Hu/ 胡晓斌


陈梓山

 


陈梓山,博士毕业于西北工业大学,主要研究方向为纤维增强复合材料制备和力学性能分析、材料的表面处理,在航空航天特种材料和材料轻量化方面有较深研究。曾参与中国商飞C919机轮刹车系统研发,具有大型复合材料制备生产线开发经验,在国内外知名期刊发表学术论文20余篇,申请发明专利10余项。

电话:13659145449
邮箱:chen33zishan@126.com

合作导师:张荻


倪源满

 

学习与工作经历:
2007.09~2011.06 安徽理工大学化学工程学院 本科
2011.09~2014.06 安徽理工大学化学工程学院 硕士
2014.09~2018.06 北京理工大学化学与化工学院 博士
2018.07~2019.10 吉利汽车研究院(宁波)有限公司 燃料电池系统开发主管工程师
2019.11-至今  上海交通大学 大满贯老品牌 博士后

 

研究方向:能源电催化

研究情况:从事能源相关电催化剂方面研究。近年来,围绕非贵金属基纳米复合材料用于电催化水分解的析氢和析氧反应,以及燃料电池阴极氧气还原反应开展研究工作,研究内容为以层状双金属氢氧化物及其衍生物为催化剂的设计、合成和性能探索。

 

电话:18811019378
邮箱:niyuanman@qq.com

合作导师:宋钫


孙萌

 

孙萌,毕业于兰州大学化学化工学院,功能有机分子化学国家重点实验室。研究方向为天然有机化学,主要从事天然产物活性组分的挖掘,研究植物中的活性化合物结构、构效关系,及其抗癌机制。已经从植物中得到4个强抗氧化活性(强于白藜芦醇)分子、7个抗癌分子、6个CDC25A/B磷酸酶抑制剂和1个放疗增敏剂。现阶段围绕手性材料展开研究,有望应用于中药功能组分开发及抗癌、抗炎和抗菌领域。


电话:17612770307
邮箱:sunmeng2010abc@163.com

合作导师:冯传良


童丽萍

 

童丽萍,生于1988年,籍贯甘肃。2018年博士毕业于上海交通大学金属基复合材料国家重点实验室,师从国家杰出青年基金、国家万人计划科技创新领军人才获得者范同祥教授。攻读博士学位期间,参与国家杰出青年基金项目,通过第一原理计算与实验研究掺杂镓石榴石红外发光陶瓷,并致力于第一性原理计算和氧化物陶瓷的制备及其X射线吸收精细结构(XAFS)分析。相关研究论文发表在J. Appl. Phys., 2017, 122, 173103、J. Phys.: Condens. Matter, 2018,30, 125901和Opt. Mater. Express, 2018, 8, 3338国际专业期刊。在此期间,与佐贺大学、日本同步辐射光源中心郭其新教授合作研究近红外发光材料精细结构;与华中科技大学国家脉冲强磁场中心合作研究磁场对近红外发光的影响Er3+离子发光机理。2018年11月继续在原课题组从事博士后工作,主要研究方向以第一性原理计算和智能温控热控氧化物薄膜的制备及其XAFS分析为主。认为自己最大的特点是平时对生活积极乐观的态度和对科研坚持不懈的精神。

 

电话:15021163915
邮箱:tonglp2012@126.com

合作导师:范同祥


杨志文

 

杨志文同志于2020年12月在上海交通大学材料学科与工程学院完成博士毕业答辩,博士导师为李万万研究员。攻读博士学位期间,共发表学术论文5篇。其中,以第一作者身份发表论文 3 篇,分别发表在 Mater. Today、 Mater. Horiz. 和Adv. Opt. Mater. 国际学术期刊,累计影响因子45.853。从2020年1月开始,继续在博士导师课题组开展博士后研究工作。目前,主要从事高性能蓝光量子点发光二极管材料和器件的设计与构筑方面的研究。

电话:18721612921
邮箱:yangzhiwen@sjtu.edu.cn


合作导师:李万万研究员


赵蕾

 

赵蕾博士毕业于大满贯老品牌。研究方向为纳米碳增强金属基复合材料的力学性能研究。熟练采用仿生复合制备工艺制备具有纳米叠层结构的石墨烯-铝基复合材料,并通过微纳尺度力学方法研究复合材料的强韧化机制。熟练掌握扫描电镜、透射电镜、聚焦离子束工作站及相关附件的使用和分析方法。



电话:18601750782
邮箱:lzhao39@sjtu.edu.cn


合作导师:张荻


马永鹏

 

马永鹏,男,1984年12月出生,河南省新密市人,2014年12月毕业于上海交通大学环境科学与工程专业,于2018年01月进入上海交通大学材料科学与工程博士后科研流动站。长期从事环保功能材料研发与应用、工业烟气净化工艺等方面的污染控制科研工作,充分关注材料科学在大气污染物控制过程中的优势,突破常规研究中 “气”、“液”、“固”等学科间相对孤立的研究格局。在烟气净化过程中多污染物的协同控制方面具有较好的研究基。乇鹗钦攵杂猩鹗粢绷缎幸刀趸、氮氧化物以及重金属汞的去除与回收方面获得多项研究专利成果。迄今在Environmental Science & Technology,Chemical Engineering Journal,Journal of Hazardous Materials,Fuel等国内外有影响的杂志上发表论文20余篇,申请或授权专利10 多项。


电话:15003835272
邮箱: mayongpeng1984@163.com


合作导师:单爱党


黄立进

 

黄立进,男,1989年10月出生。2018年于上海交通大学材料科学与工程专业博士毕业,次年进入上海交通大学从事博士后研究,主要研究方向为高效焊接方法与先进连接技术、焊接过程监测及智能控制和焊接缺陷建模预测与控制。近几年,作为项目负责人承担2项科研项目资助,作为项目骨干参加完成国家自然科学基金面上项目、与企业合作项目等5项。迄今已在国内外学术期刊上发表论文19篇,其中SCI第一作者论文9篇,通讯作者1篇,国际会议口头报告1篇。荣获2019年上海市“超级博士后”激励计划。

电话:18621107063
E-mail:huanglijin1989@163.com

合作导师:华学明、陈强


 

 

版权所有©大满贯老品牌 通讯地址:上海市东川路800号 联系电话:34203098 邮编:200240
大满贯老品牌-dmg7777大满贯