大满贯老品牌

 
在校生 教职工 考生及访客 校友 EN
师资队伍
首页-师资队伍-教工名录
 姓名:  陈哲
 职称:  教授
 博导/硕导:  博导
 所属二级机构:   特种材料研究所
 通讯地址:  上海市东川路800号大满贯老品牌特种材料研究所
 邮编:  200240
 E-mail:  Zhe.chen@sjtu.edu.cn
 联系电话:  13166225829
从事专业:

材料科学与工程

学习与工作简历:

2001年-2005年  上海交通大学 材料学 工学学士

2005年-2008年  上海交通大学 材料加工过程 工学硕士

2008年-2011年  法国巴黎第十一大学 材料物理与化学 理学博士

2011年-2013年  上海交通大学 材料科学系 博士后

2014年-2015年  上海交通大学 大满贯老品牌 讲师

2015年-2020     上海交通大学 大满贯老品牌 副教授

2021-至今     上海交通大学 大满贯老品牌 教授


研究方向一

铝基复合材料及其3D打印

研究方向二

金属材料跨尺度原位力学行为、电镜分析技术、中子/同步辐射衍射及散射、残余应力分析

研究情况

陈哲教授主要面向航空、航天、军工等高端领域的应用需求,从事铝基复合材料及其3D打印、金属材料跨尺度原位力学行为、电镜分析技术、中子/同步辐射衍射及散射、残余应力分析等研究。在Acta Materialia,Scripta Materialia,Journal of Materials Science and Technology、Composites Part B等杂志共发表SCI论文70余篇,主持国家自然科学基金(2项)、航天科技、中国商飞、中航工业型号项目12项,累计研究经费2000余万元。获2017年上海市技术发明一等奖。申请国家标准两项;申请国家发明专利39项(已授权8项);先后为我国航空航天领域研制10余种(数百件)复合材料关键部件,部分已装机应用。研发的纳米颗粒增强铝基复合材料已装机应用于航天一院某重型登月火箭的大型主承力结构构件(5米级别构件),主承力长桁等主体结构。

讲授主要课程

《载荷疲劳材料力学》、《连续介质与结构力学》、《材料科学基础》、《材料失效分析》


教学研究
代表性论文、论著

论文:

1. Ma, Ahmed Addad, Gang Ji∗, Ming-Xing Zhang, Williams Lefebvre, Zhe Chen, Vincent Ji Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite,Acta Materialia 185 (2020) 287299 IF=7.656

2.  X.P. Li*, G. Ji, Z. Chen*, A. Addad, Y. Wu, H.W. Wang, J. Vleugels, J. Van Humbeeck, J.P. Kruth* Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility ACTA MATERIALIA 129 (2017) 183-193 ESI高被引论文 IF=7.656

3. C.Y. Dan, Z. Chen*, G. Ji, S.Y. Zhong*, J. Li, X.R. Li, F. Brisset, G.A. Sun, H.W. Wang, V. Ji Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates Scripta Materialia 166 (2019) 139143 IF=5.079

4.  Zhe Chen, Gang Ji, Nathalie Prudhomme, Ahmed Addad, Vincent Ji,Jerome Chevalierd and Guillaume Bernard-Granger Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants Scripta Materialia 68 (2013) 559562 IF=5.079

5. Q. Yang, Y. Ma, Z. Chen , G. Ji, M.L. Wang, S.Y. Zhong∗ , Y. Wu, V. Ji, H.W. Wang A new powder metallurgy routine to fabricate TiB2/AlZnMgCu nanocomposites based on composite powders with pre-embedded nanoparticles Materialia 8 (2019) 100458 IF=暂无

6. Jun Liu, Zhe Chen*, Fengguo Zhang, Gang Ji, Mingliang Wang, Yu Ma, Vincent Ji, Shengyi Zhong, Yi Wu* & Haowei Wang Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process Materials Research Letters IF=6.600

7. Q. Yang, Y.T. Liu, J. Liu, L.Wang, Z. Chen*, M.L. Wang, S.Y. Zhong*, Y.Wu, H.W.Wang Microstructure evolution of the rapidly solidified alloy powders and composite powders Materials & Design 182 (2019) 108045 IF=6.289

8. X.L Xie, Y. Ma, C.Y. Chen, G. Ji*, C. Verdy, H.J. Wu, Z. Chen*, S. Yuan, B. Normand, S. Yin, H.L. Liao, Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder Journal of Alloys and Compounds 819 (2020) 152962 IF=4.650

9.  Z. Chen, J. Li, A. Borbely, G. Ji, S.Y. Zhong*, Y.Wu, M.L. Wang*, H.W. Wang The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing Materials & Design 88 (2015) 9991007 IF=6.289

10.  Z. Chen, G.A. Sun, Y.Wu, M.H.Mathon, A. Borbely, D. Chen, G. Ji, M.L. Wang*,S.Y. Zhong*, H.W.Wang Multi-scale study of microstructure evolution in hot extruded nano-sized TiB 2 particle reinforced aluminum composites Materials & Design 116 (2017) 577590 IF=6.289

11. Q. Yang, D.L. Cheng, J. Liu, L. Wang, Z. Chen*, M.L. Wang, S.Y. Zhong, Y. Wu, G. Ji, H.W. Wang Microstructure evolution of the TiB2/Al composites fabricated by powder metallurgy during hot extrusion Materials Characterization 155 (2019) 109834 IF=3.562

12. Jun Liu, Zhe Chen*,Fengguo Zhang, Gang Ji, Shengyi Zhong, Yi Wu, Mingliang Wang,Guangai Sun, Haowei Wang. Microstructural evolution and mechanical property of nanoparticles reinforced Al matrix composites during accumulative orthogonal extrusion process Materials Characterization 155 (2019) 109790 IF= 3.562

13. Y.K. Xiao, Z.Y. Bian, Y.Wu*, G. Ji, Y.Q. Li, M.J. Li, Q. Lian, Z. Chen*, A. Addad, H.W. Wang Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting Journal of Alloys and Compounds 798 (2019) 644-655 IF=4.650

14. Q. Yang, Y. Shen, J. Liu, L. Wang, Z. Chen*, M.L. Wang, S.Y. Zhong*, Y.Wu, H.W. Wang Microstructure and mechanical response of TiB2/AlZnMgCu composites with more addition of Zn Journal of Alloys and Compounds 816 (2020) 152584 IF=4.650

15. C.Y. Dan, Z. Chen*, M.H. Mathon, G. Ji, L.W. Li, Y. Wu, F. Brisset, L. Guo, H.W. Wang, V. Ji Cold rolling texture evolution of TiB2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis Materials Characterization 136 (2018) 293301 IF=3.562

16. Q.Yang, Y.Shen, J.Liu, L.Wang, Z.Chen*, M.L.Wang, S.Y.Zhong*, Y.Wu, H.W.Wang Microstructure and mechanical response of TiB2/Al-Zn-Mg-Cu composites with more addition of Zn Journal of Alloys and Compounds 816 (2020) 152584 IF=4.650

17.  J.M. Lia,, J. Liu, L. Wang, Z. Chen*, Q.W. Shi, C.Y. Dan, Y. Wu, S.Y. Zhong*,H.W. Wang, Anisotropic behavior of TiB2 nanoparticles reinforced 2024Al composites rolling sheet Materials Characterization 162 (2020) 110196 IF=3.562

18.  Fengguo Zhang, Zhe Chen*, Shengyi Zhong, Han Chen, Jun Liu, Qing Yang, Haowei Wang Strain measurement of particle-reinforced composites at the microscale: An approach towards concurrent characterization of strain and microstructure Micron 121 (2019) 3342 IF=1.726

19.  J. Liu, Z. Chen*, F.G. Zhang, G. Ji, Y. Ma, M.L. Wang, S.Y. Zhong*, J. Li, H. Wang, H.W. Wang Improved structural homogeneity and mechanical properties of nanoparticles reinforced Al composites after orthogonal thermomechanical processes Journal of Alloys and Compounds 767 (2018) 293-301 IF=4.650

20.  Ming Wang, Yan Wang, Jun Liu, Zhe Chen*, Han Chen, Yi Wu, Fengguo Zhang,Haowei Wang Effects of Zn content on microstructures and mechanical properties of in-situ TiB2/Al-Zn-Mg-Cu composites subjected to hot extrusion MATERIALS SCIENCE AND ENGINEERING A 742 (2019) 364372 IF=4.652

21.  C.Y. Dan, Z. Chen*, G. Ji, S.H. Zhong, Y. Wu*, F. Brisset, H.W. Wang, V. Ji Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites Materials & Design 130 (2017) 357365 IF=6.289

22.  Yujiong Chen, Hua Sun, Zechen Li, Yi Wu*, Yakai Xiao, Zhe Chen*,Shengyi Zhong* and Haowei Wang Strategy of Residual Stress Determination on Selective Laser Melted Al Alloy Using XRD Materials 2020, 13, 451 IF=3.057

23.  Qian Wang, Changzhi Liu, Ruijuan Yao, Hong Zhu, Xiaomin Liu, Mingliang Wang*, Zhe Chen*, Haowei Wang First-principles study on the stability and work function of low-index surfaces of TiB2 Computational Materials Science 172 (2020) 109356 IF=2.863

24.  Mengxing Chen, Xiaopeng Li*, Gang Ji, Yi Wu, Zhe Chen*, Wouter Baekelant, Kim Vanmeensel, Haowei Wang and Jean-Pierre Kruth Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing Appl. Sci 2017, 7, 250 IF=2.474

25.  Xiaofei Ju, Fengguo Zhang, Zhe Chen*, Gang Ji, Mingliang Wang, Yi Wu*,Shengyi Zhong and Haowei Wang Microstructure of Multi-Pass Friction-Stir-Processed Al-Zn-Mg-Cu Alloys Reinforced by Nano-Sized TiB2 Particles and the Effect of T6 Heat Treatment Metals 2017, 7, 530 IF=2.117

26.  Mingliang Wang, Cunjuan Xia, Yi Wu, Dong Chen*, Zhe Chen*, Naiheng Ma and Haowei Wang Phase stability, elastic and electronic properties of HfRh intermetallic compounds from firstprinciples calculations RSC Adv., 2017, 7, 20241 IF=3.119

27.  Y. Tang, Z. Chen*, A. Borbély, G. Ji, S.Y. Zhong, D. Schryvers, V. Ji, H.W.Wang Quantitative study of particle size distribution in an in-situ grown AlTiB2 composite by synchrotron X-ray diffraction and electron microscopy Materials Characterization 102 (2015) 131136 IF=3.562

28.   Zhe Chen, Peng Zhang, Dong Chen, Yi Wu, Mingliang Wang*, Naiheng Ma, and Haowei Wang First-principles investigation of thermodynamic, elastic and electronic properties of Al3V and Al3Nb intermetallics under pressures JOURNAL OF APPLIED PHYSICS 117, 085904 (2015) IF=2.286

29.  C. Zhou, W. Huang, Z. Chen*, G. Ji, M.L. Wang, D. Chen, H.W. Wang In-plane thermal enhancement behaviors of Al matrix composites with oriented graphite flake alignment Composites: Part B 70 (2015) 256262 IF=7.635

30.   C.Zhou, D.Chen, X.B.Zhang, Z.Chen, S.Y.Zhong, Y.Wu, G.Ji, H.W.Wang The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites Physics Letters A 379 (2015) 452–457 IF=2.278

毕业博士生数
毕业硕士生数 指导毕业10余人,多人在国内外一流高校继续深造,或进入知名企业就业
参加学术团体、任何职务

中国材料研究会青委会 理事

申请专利

申请国家发明专利39项(已授权8项)

荣誉和奖励

奖励:

上海市技术发明奖一等奖,2017年(排4)

其他
版权所有©大满贯老品牌 通讯地址:上海市东川路800号 联系电话:34203098 邮编:200240
大满贯老品牌-dmg7777大满贯